Zenith Redefines Mechanical Watches

The accuracy of the movement is directly related to the vibration frequency of the escapement system. The faster the vibration frequency, the smaller the energy division and the more accurate the pointer operation. The traditional mechanical movement relies on the balance of the hairspring to split the energy. The vibration frequency is usually 2.5 Hz, which is a little higher to 4 Hz, which is 28,800 times per hour. 5 Hz is already the limit of most mechanical movements. If the vibration frequency is too high, the movement made entirely of machinery may not be affordable, and it may collapse when it turns, which is the result of the hairspring structure. Physical ceiling".

Now, when Zenith lost the set of hairsprings, it also lifted the upper limit of the frequency. The replacement of the hairspring device is a "ZENITH Oscillator" made of monocrystalline silicon: this new equipment can bring a high vibration frequency of up to 18 Hz to the mechanical movement, thus the mechanical movement The daily error is reduced to less than 0.3 seconds. Topreplicaon - top replica watches online like replica patek philippe nautilus, Panerai, Omega, Breitling, TAG Heuer, Hublot.

A 0.5 mm Zenith vibration plate revolutionizes the traditional escapement of more than 30 parts, eliminating contact, friction, wear and deformation; innovative use of monocrystalline silicon allows this new component to The temperature and magnetic field changes are always stable; its escape wheel is made of soft blades, which is a pioneering work in the watchmaking world; the error within 0.3 seconds a day is the precision of the contemporary mechanical watch again. Push horizontally to the peak.